Category: Drainage and Plumbing

A kitchen is an integral part of your home. This particular area of your house provides ample room for you to prepare your meals without the fear of disturbing anyone. That’s why maintaining your kitchen at its best condition is very crucial to the overall integrity of a house. Otherwise, you would have a hard time feeding your family if there is something wrong with your kitchen. One of the many problems you might encounter in your kitchen is a clogged sink. Rather than spend your precious time and money on hiring a plumber, it would do you well to know how to solve this predicament on your own. Don’t worry because this task is simple enough to accomplish.

Gather the Necessary Tools

First and foremost, you would need to the proper tools to remove anything that’s clogging your kitchen sink. You would need a plunger, clamp, wrench, a drain snake, and a pair of pliers to effectively remove any kind of clog in your kitchen sink. At the same time, don’t forget your protective gloves as well. Anything inside your kitchen’s drainage system is sure to be dirty and exposing your bare skin to them can be really harmful. Do yourselves a favor and don’t allow that to happen by getting a pair of gloves.

Get Rid of Any Clogging Materials Using a Plunger

After you have obtained the required tools, get the plunger first. Hold it with a firm grip and place the other end on your kitchen sink’s hole. Do remember to place the plunger using a 90-degree angle and push it down gently at first. Exert a little effort as you gradually push down on the aforementioned hole. The plunger will remove some of the food waste or trash that’s stuck in your kitchen’s sink and make this job a whole lot easier. Keep in mind to have a waste container nearby so you can place the waste inside it right away.

Eliminate All Traces of Dirt in the P-Trap

Even after using a plunger, there will still be a lot of waste left in your kitchen sink. To remedy that problem, you will need to disassemble the P-Trap under your sink. Basically, this pipe resembles the letter J and transmits all waste from your sink to your house’s drainage system. For starters, place a basic underneath this kitchen plumbing fixture to catch all waste when you disassemble it. Loosen the slip nut that’s holding the P-Trap in place with the help of a wrench. Once you have loosened the P-Trap, take it out and clean all the waste you see with soap and water. You might need a powerful detergent because there will be grease in it.

Clear the Remaining Clogging Materials in the Kitchen Drain Pipes

Along with your sink and P-Trap, your kitchen’s drain pipes can also contain waste in them. If you have done the previous steps, you might need to clean these drain pipes as well. Better get the drain snake and insert it into your drain pipes. Continue inserting this plumbing tool until it hits an obstruction. Once it does, crank the drain snake until its tip digs into the clog. You will be able to pull the material that’s clogging your pipes and clear your drainage once again.

Remember, if the job looks a little bit daunting, don’t be shy about hire a professional plumber.

 

The plumbing that is inside of a home is essential for a healthy environment and the proper functioning of many different systems. Problems with the plumbing are sometimes hard to detect. Some problems may seem simple but often becomes more serious when it is ignored or not remedied properly. The idea that these problems will somehow fix themselves is not correct and can be very harmful to the pipes. There are several common situations inside of a house that should not be ignored.

MOLD AND MILDEW

Certain homes experience problems with mold and mildew on a regular basis because of the seasons or the climate in an area. When mold and mildew suddenly appear when there was none before, this is a potential sign of plumbing troubles inside of the house. This is an indication that extra humidity and moisture are entering the air. Extra moisture that triggers the growth of mildew and mold is frequently caused by a leak in a pipe that releases water into the walls, under the floors or into other spaces. Leaks are not easy to detect, and the extent of the damage is difficult to assess without experience. This is a situation where a professional plumbing service and repair contractor should be called in to fix the problem.

SLOW DRAINS

Everyone experiences some clog or slow drain at some point which is normally caused by a physical obstruction in a pipe. It is also caused by problems deeper in the pipes and drains of a home. Drains that have been running slow even after cleaning the entry points in sinks and tubs usually require the attention of a trained plumber. Several issues could be taking place including breaks in the line, clogs that have moved down to the primary drainage point and a buildup of materials inside of the pipes. All of these problems require the special skills of a plumbing service and repair professional.

UNPLEASANT ODORS

There are special mechanisms in place that are intended to trap gases, remove waste and prevent municipal sewage from entering the pipes in a home. One sign that something is wrong is when unpleasant odors begin to emanate from faucets, drains or other fixtures attached to the pipes in the house. This is a sign that there might be a severe problem with the drainage system or the connections to the municipal system outside of the house. The only way to fix this problem is to contact Best plumber and repair contractor who will be able to diagnose the problem and stop the odors accurately.

No matter, whether it is a leak, unpleasant odors, slow drains, mold, and mildew, or anything else, professional plumbers of this company are always there to help you out. You can call them at any time as they offer 24-hour emergency plumbing service.

When upgrading a home, one of the things that you will be looking at is the drains. You want to ensure that after renovations, you have a properly functioning plumbing system. This is because apart from making the house more comfortable, it can also increase its value, and reduce insurance costs. So, how do you find the best contractor to repair broken pipes? Consider the following factors.

Choosing the Right Plumber

It all starts by choosing a plumber to work on your drainage pipes. Regardless of where you live, you are likely to find many contractors for this job. However, it is unlikely that they all will be suitable. You need to find out what they are capable of. For example, you may ask for some of the projects that they worked on and see if they reflect what you want. You also should talk to them about your unique needs so that they understand your project.

Latest Plumbing Technology

If you look at some of the leading plumbing companies in your area, you will notice that they have invested in the latest technology for broken pipes repair. Some of them use video inspection to find faults in pipes and fix them accordingly. This is the reason they are always fast and accurate in what they do. If you choose a company that still relies on ancient techniques, you will only end up a disappointed customer.

When looking for a contractor to repair broken pipes, you should insist on experience. During their work, plumbers acquire unique skills and therefore, they become better with time. At the end of the day, what you need is a home with the perfect drainage system.

Entrust the repair of your broken pipes to the professional plumbers of this company. They are available 24/7, including holidays and weekends. They also offer water damage restoration services. 

The right tool for the job makes all the difference when you’ve got a clogged toilet drain. No matter what the clog is, if it’s in a toilet then it’s probably tough on the nose, not to mention disgusting. There’s no reason to fear the toilet clog though! With the right tool, you might not even need to call a professional plumber.

Toilet Auger

A common and often effective tool for unclogging a toilet is the trusty toilet auger. These can be found at major home supply stores, and it’s a tool that can be invaluable if you find yourself getting regular clogs. The tool moves through the toilet drain in order to remove the clog or whatever else may be causing the obstruction. The unique design of the toilet auger makes it more effective at removing clogs than most other options like toilet snakes. Toilet augers have a coil head that hooks objects to free them from the toilet. The long, flexible shaft has an auger bit at one end of the tool, with a crank on the other end that allows the user to turn and push, removing the drain clog.

Top Snake

You don’t’ always need something big to unclog a toilet, or to unclog any kind of smaller opening. A top snake is most effective on stubborn clogs in tubs, showers, washing machines, and sinks. The shape and the size can vary widely, leaving you with lots of options for your plumbing needs. The wire coil of a top snake has a corkscrew-like tip that goes into the pipes to hunt down the clog. With a long cord that’s made from tough cable, top snakes are perfect for drains that don’t have too much build up.

Plunger

Everyone has a plunger! This stalwart tool has helped Elizabeth homeowners get stuff unstuck for generations. Most people don’t realize that there are two types of plungers – flange plungers and cup plungers. Flange plungers are perfect for toilets, with their lipped design, help create a better seal in your toilet to get the drain moving. Cup plungers are what most of us thing of as a regular plunger, and their rubber cup is perfect for sinks and tubs.

The more you know, the better you’ll be able to get the right tool to help you unclog your drain easily and without having to resort to calling a sewer service!

Looking for quality tools to unclog your toilet? If you need just a little pressure to get things flowing, check out the great inventory that Lowe’s has.