5 Tips To Organize Your Garage Like A Pro

organize home garage like pro

Do you have that problem of being so unorganized due to your laziness? And you have no care about organizing? Well, now is the time for that to change, or maybe you want to change that’s why you are now in this article that has an element about the organization. Well if that’s the reason then good for you because you’re doing the right thing and making the right decision.

A garage is a part of a house that houses vehicles, machines, equipment, or items related to outdoor activities. In a garage, there will be your car, your motorcycle, your lawn mowing machines, household equipment, mechanical tools, and etc. That is why the garage is most of the time full of things. And most of the time, a garage could get so messy and unorganized that would not be pleasing to the eyes. If you have an unorganized garage, this is the time to make a change, give it the look it deserves.

Plus, organizing your garage could also be a great help, you would be able to locate things easier and faster and you would also avoid accidents. Now, it’s your time to shine for your garage. We are here to help you as we provide you below some tips on how to organize a garage like a pro.

Use your walls

There are wall organization systems available in the market, some could be pricey but they sure are efficient. Prices would only vary on the size and material it is made of. Purchase wall organization systems and install it on your wall. When successfully installed you can put some of your equipment there, like your shovel, broom, rake, extension cords, and etc. This would provide you with the proper storage of the said items. You can also make use of your walls to install hanging cabinets or hanging storage boxes.


This might sound unusual but freezers can also be placed in a garage. If you belong to a family who loves meat, fish, or any products needed to store in freezers like ice cream, then this technique is for you. If you don’t have enough space in your freezer or in your pantry, you can store your food in a chest freezer placed in your garage. This would give you the opportunity to purchase bulk orders of fresh meat and seafood.

Cabinet storage system

Cabinets are one of the most convenient things to store items. Plus they can be stylish to fit your garage too. Purchase cabinets with drawers that their top acts as a countertop. Most cabinet systems also have hanging cabinets with them. You can store your tools and some equipment in your cabinet or drawers. And your countertops can act as a table to put your snacks when doing a task, or to put your things, or could also act as an office desk to make plans.

Ceiling storage box

Install storage boxes in your ceilings. If you have no space left in your walls or cabinets, you can use this technique, build a storage box sliding system connected to your ceiling for extra storage.

Chemical products cabinet

Purchase a cabinet for your chemicals such as anti-pesticide sprays, car care products, or any other products that have chemicals. It is best to store items with chemicals in one place to ensure you that there won’t be spills that could eventually by hazardous.


Sure Signs Your Home Needs Improvement – ASAP!

Our beautiful homes, like us, also age in time. Not all homes stay as good as how it was when it was brand new. And when your home ages, you will have multiple problems. From your drainage systems to the appearance of your home. And if a problem isn’t met with a solution, it could be worse and could cause you a lot of money just by fixing it. You always have to make sure your home is doing well, check your home from time to time and eventually, you will thank yourself for taking the time and effort to check on your home.

Chipping paint

If you see your paint chipping off or fading away, it is time for some touch-up. Paint is important for your home’s appearance because it gives color and adds life. Apply some brand new paint to your home to make it look fresh, neat, and clean.

When termite infestations occur

When you see termites in your home, try to look and inspect for where they came from, it is important to conduct a home check if you see signs of them being present. Termite infestation could really be dangerous since they are capable of eating the foundation of your home and eventually make it hollow. If that happens, your home might become weak and lose its stability. If you don’t fix that infestation immediately, you will be facing huge problems in the near future. And don’t forget to be on lookout for if you see any bed bugs, be sure to hire a bed bug exterminator asap and DON’T try to fix it yourself. 

Leaky pipes

Check your pipes and drainage systems from time to time, you don’t want molds and rust to grow in your home. A leaky pipe could turn into a huge problem and you don’t want that to happen.

Visible water damages

Ceilings and walls could have watermarks and that means you have a leak. It could be on your roofing or your pipe and drainage system. It is important to take action when you encounter one since it could rot your home’s foundation and turn it into a big problem which will cost you a lot.

Pest infestation

If you hear rattling or weird sounds below your floor, inside the wall, or above your ceiling, it means something is in there and it is best to check on it immediately – you might have pest or rodents in your home. Rodents such as rats or mice could lead you to huge problems, they can destroy your home foundation, damage your furniture, and damage your mechanical items. They can also spread diseases, and we mean deadly diseases.

Essential Tech Devices to have in Your Home

cctv camera held by a guy

In an era where technology is developing and expanding, new, useful, intimidating, and impressive gadgets are showering malls and even online marketplaces. Smart minds of current digital or technology company owners and inventors provide us high technological gadgets for any aspect of our lives. And more innovative ideas are to come since more discoveries are found that could contribute to the technological world. It also seems that there is no stop from technology to enhance and sprout since technology is part of our lives. Many gadgets are created to make our lives easier. So let us make our home a smart home by purchasing these essential tech devices you should have in your home

A smart air conditioning system

Smart air conditioning systems are wireless or have wifi. Let’s say in a hot weather where you’re out doing the groceries or running some errands and are about to go home to watch some movies and relax, but knowing you still have to turn your air-con on and wait for the room to cool. With smart air conditioning system, before going home you can turn the air-con on using your smartphone and wifi so when you get home, the room is ready to cool you up and have you relaxed.

Light dimmer

You can control the brightness of your light anywhere in your home using a light dimmer. If you want to sleep with a little bit of light you can adjust the light of your room to your desired brightness.

Motorised window blinds

All of us seem to be lazy when getting up early in the morning when the sun greets us. With this smart window blinds, you would not be forced to get out of bed and turn your blinds up to see the sun. In just a tap of your finger to the blinds’ remote the sun will automatically shine at you and force you to get you out off the bed. Or if you just want to save time or very sleepy and don’t have the time and effort to roll down your blinds, having this smart blinds will leave you satisfied.

Motion sensor trash bins

With just a swift of your hand, the lid would open and you could throw your trash touch-free, unlike other normal trash bins, you sometimes accidentally touch the bin which contains a lot of germs and bacteria.

Smart CCTV system

We should have CCTV cameras so we could have safety surveillance on our homes. If a burglar or a crime has been committed in our home we could easily have proof and data because of our CCTV cameras. But don’t just purchase any CCTV camera, purchase a smart CCTV system. Smart CCTV system has wireless features wherein you can view the surveillance of your camera through your smartphone online and live.

Shower control

This device is to control the temperature and the intensity of your shower. Some may also include a music system so you could sing while showering.

Smart doorbells

This doorbell does not only give you a ring if someone is there, it also has a built-in camera and mic so you could see who is there and you could communicate with them.

Smart social robots

This robot can be your assistant and your best friend at the same time. Smart robots can tell you the news of today, the date, the weather, the time, and many other pieces of information you want. What makes them social is that you could communicate with them too, they can play music for you, capture a photo or video of you or your home and others can also dance and tell jokes adding positive energy for your home.


At the end of the day, call a computer consultant or a computer networking services company to help you install any of these.


7 Tips to Start a Prosperous Carpentry Business

man doing woodwork for carpentry business

So you love carpentry and all its woodwork? If you’re considering to put that love and hobby into a business then this article is for you! This business may not be as easy to run as before – there are more things to consider before you start working in this field. And this is the right place to help you decide and prepare for that investment!

1. Ask Yourself If You Have What It Takes

This means asking yourself if you have the right skills, experience, and knowledge. Of course, if you love carpentry and it’s your hobby, then you’re most likely fit for this business. You should also be familiar with the industry’s best practices and follow an organized system you can work with – whether going solo or with a partner.

2. Start With A Solid Business Plan

First, think of your goals – then, build a plan around those goals. Ask yourself questions about approaches you can conduct which will bring you closer to that goal. Everything starts with a plan. And, the more solid and accurate the plan is, the better. Research is part of planning – know your target market, your local business needs, know what type of services you’ll offer, and have an idea of how much your price range will be. This business plan will serve as your guide throughout your start-up.

3. Decide If You Want to Go Solo or Hire Employees

Things can get overwhelming when you go solo and your business starts to grow. Yes, of course, you have the carpentry skills and you can definitely go solo. But as a business, there are other aspects you should manage just like the bookkeeping, marketing, taxes, and so on. It may be nice to go solo at first and experience all kinds of jobs within the business at first hand – but as your business grows, you’ll need help from others. In this way, you can further focus on improving your service and serving your best to your clients.

4. Set Up The Shop at the decided Location

You’ll need all the tools and high-quality products that will help you to cope with the workflow. Don’t go cheap on your investments and make sure they’re all reliable. Once you set up the shop, decide whether you want to be home-based or operate in an owned or rented location. Carpentry makes lots of noises and this may be uncomfortable for other people living in your home.

5. Register Your Business

Of course, Your business won’t be complete if you don’t have a business name and logo. Make sure to come up with a catchy brand name so people can remember it easily. DO NOT forget to register and trademark your business name. You don’t want to have someone use your brand and become successful on your behalf, right?

6. Be Insured

Every business is prone to mishaps, and having no insurance is very risky. Think in advance and protect your business from unexpected future damages or lawsuits.

7. Be Proactive!

Get up, get moving, and ACT! Work smart and not busy. Think carefully about your actions and be sure they bring you closer to your goals. Thinking and sharing your ideas isn’t enough – be sure to follow your ideas and make things happen!

Investments like this isn’t a joke and you should really consider even the smallest details. One way to bring you to the right path is to consult a Financial Advisor and Accountant – especially when it comes to your taxes, you don’t want to have any future problems with the government, right? A start-up business can be harder when you entertain your clients and run your business but at the same time manage your business’ bookkeeping, taxes, payroll, and such – companies such as Wisely Advised can help you manage these while you just focus on your clients!

5 Easiest and On the Budget Ways to Quickly Improve Your Kitchen

We all have a dream kitchen we badly want – and yet, we find ourselves not cooking in that wonderful kitchen and instead, dealing with our current kitchen’s inconvenience and quirks every single day. Want to change that and level up on your kitchen improvement skills?

You don’t need to spend a huge amount of money to have your Kitchen remodeled. Follow this tips and see a drastic change – you might even slowly be able to achieve that dream kitchen of yours! Just a few materials and your creative skill are needed.

Have an Accent Wall

kitchen accent wall for home improvementAnd what I mean by “Accent” wall is a shade that you usually don’t do. Paint a single wall if you don’t have the time to do the whole room. The paint may be the same shade but 3x darker, or give your kitchen a Pop! Paint a contrasting color but still compliment the entire room. You can also add a Big Painting or paint something catchy on a portion of a plain wall.

Paint Your Cabinets

Bored of your old, plain cabinets? Give it some life again! Paint can do a LOT when it comes to appearances and can make your kitchen look a lot different. You just need to know how to combine colors and see that they complement each other. Keep in mind too, drawers and cabinets should be painted properly.

Have Some Small Stylish Appliances

green appliance for style in kitchen








Yes, you read that right! There are now appliances everywhere that have a stylish look and color that can really pop and make an accent in the room. Opt for a few pieces of this and distribute them in the Kitchen evenly with some of your plain-looking appliances. These appliances can be a toaster, mixer, coffee maker – as long as they’re small. Treat them like an accessory or jewelry in the Kitchen that you can move around or put away anytime you want.

A Splash of color in front of the Sink

This has two benefits: makes your feet comfortable and gives your room an added attraction. Opting for a colored rug would be best. And I suggest choosing dark colors to keep it looking clean longer since you’ll be stepping on this rug often and stuff may spill on it – and a dirty looking rug in the Kitchen floor is not pretty to see.


lights under kitchen cabinets home improvementSometimes, to see the beauty of your kitchen, you just need to change the lighting! To seriously add to your Kitchen Improvement- if you’re opting for a bright, fresh looking Kitchen then go for a Cool White bulb. But if you’re looking to make your Kitchen have a warm, cozy feel, then get a Warm White Bulb that may look yellow or even orangey. Don’t forget about drawer interior lights!

There are a lot more ways to improve your kitchen but these are the 5 most basic things to do that shows a drastic change in the improvement of your Home Kitchen quickly. Just remember to keep your goal in mind and add some creativity to it!

Audio Everywhere

The new components available these days allow all kinds of cool setups. If you’re a music lover (or even if you’re not) and you like projects, consider wiring your house for audio and controlling everything by remote control with your smartphone. Sound esoteric? It used to be but with today’s products it’s not only do-able, you do-it-yourselfers can have fun, get creative and wind up with sound everywhere.

Only a few years ago, a project such as this would have not only been fairly complicated but expensive. Today, you can do it for a very reasonable cost. The most common system today uses A-bus technology. There are several manufacturers of A-bus components. Such a system uses the same cables as the ones you use to connect to the Internet, the so-called cat-5e cable. Its eight wires can do everything needed for the task. This article is too short to describe the details. You can get the help you need where you buy the components. From a cost standpoint, you can probably do a reasonably comprehensive system for somewhere in the neighborhood of $1000.

The most difficult part of the project is running the wires from a central location without destroying the walls or giving yourself a new plaster and paint project. Once that’s done, installing the local connector boxes is not very difficult for our handy readers. However, choosing the right location for the components and hence the terminals should be thought about carefully. Be aware that you’ll need an electric outlet nearby to power the central transformer. Most installers put the central unit in the basement, out of the way. Each room with the sound needs a low voltage box. The cat 5-e cables and speaker wires are mounted in the box.

If you look online, you can find several good descriptions of a system with wiring diagrams. Many suppliers will even give you suggestions about which manufacturer’s components you should buy. They would probably love to sell you the components and would even like to contract with you to do the job. But if you want to do it yourself, find a company that represents a line of components and check their willingness to be available to answer questions when you get stuck. Most companies are happy to do so. They want you to be satisfied since most of their customers will add capabilities as they improve and recommend them to their neighbors.

We recommend looking up a home networking and automation professional on google.  Very often it’s the computer networking services guys who also specialize in home automation.

A Handy Guide on How To Install a New Chimney Flashing

Rainstorms are always a good reason to stay home and spend all day with your loved ones. One of the many reasons why a storm can ruin your day is when water leaks out from your ceiling. There are many causes for this to happen. Foremost among them is a roof that has a few or many holes in it. While this is the most common reason, your chimney can also be a culprit to your water leak problems. If this is the case in your house, one chimney component you should check first is its flashing.

Basically, a flashing is pieces of sheet metal that connects the chimney to your house’s roof. Apart from creating the aforementioned connection, the chimney flashing also prevents water and other harmful elements from entering your home. Although it should withstand all kinds of weather conditions, its lifespan can deteriorate as time passes by. When this happens, you should take some time off to remedy this problem before it can affect your residential living experience.

Before you start on the task itself, you will need to gather the necessary materials and tools to replace your old chimney flashing. First off, it is essential you obtain a large piece of sheet metal. Go for sheet metal with a 26 gauge and is prefabricated to ensure quality. Plus, you can have this piece of metal bent and customized according to the measurements of your chimney. Next, you will need Polyurethane caulk, roofing membrane, and a couple of roof brackets. When it comes to tools, you will need to obtain a ladder, cutting snips, a pencil, hammer, chisel, tape measure, a spirit level, and a grinder. Of course, don’t forget safety gear like gloves, eye goggles, and a roof harness.

Get rid of the old flashing in your chimney

Once you have determined your house’s chimney is causing trouble, you need to take it out right away. Set up your trusted ladder and use a roof harness to prevent any accident from occurring. Then, locate the chimney flashing and pry it out using a hammer and a chisel. Chip away at the roof cement that’s holding everything together until you have removed the defective flashing.

Customize the size of the base and step flashing

Now that you have cleared your chimney from its old flashing, you should take out your tape measure, pencil, and spirit level. You need to take the measurements of your chimney so you can cut accurately through the sheet metal you purchased.

Once you have those measurements, step down from your roof and cut the customized sheet metal using the snips. Make sure the metal is bent accurately at 45 degrees to ensure its durability. Afterwards, cut several other pieces of metal for the step flashing and saddle. Use your grinder to smoothen out the edges and make everything equal. Do remember to visualize how these separate pieces of metal will come together on your chimney so they will turn out alright.

Install the step flashing and chimney saddle

After cutting your sheet metal, you can now return to your roof to install them onto your chimney. First, lay down the base flashing on your chimney and seal it with some roofing membrane. Use your spirit level to keep your base flashing equal to the roof. Then, place the metal saddle and seal it with more roof membrane. Allow it to dry and you can move on to the next step.

Add step flashing on the base flashing

Now, get your tape measure and pencil to mark where you’re going to install the step flashing. Afterwards, attach it to the side of your chimney on the markings you made using roof membrane. Focus on how each step flashing overlaps with one another to ensure water won’t seep in through them. Complete the installation process by hammering down roofing nails on the base flashing to secure it.

Apply a coat of paint on your new chimney flashing

Once you have installed a new flashing to your chimney, it’s now time to make it more presentable. Get a primer and apply it on your chimney flashing to help the paint stick on it. Afterwards, apply the main coat of your chosen paint color and allow it to dry. When the paint has dried up, your chimney flashing installation work is now down.


Finding leaks where much of the heat is dissipated is the first thing you should do. But definitely, you should consider the effects of lack of insulation on your heating bills. The worst culprit in a home is the attic. Keep in mind that insulation materials are relatively inexpensive and are a worthwhile investment. First because a modest investment can have dramatic results. Another thing to consider is that reduction in energy use has an effect on air pollution.

There are several types of insulation and what you use depends on where you have to put it. There’s fiberglass that comes in rolls or sheets of varything thickness. Cellulose has to be blown in. And finally, there are several types of foam. Fiberglass is rated with an R number. When you’re ready to go ahead, your supplier can tell you what rating you need. It’s likely to be different for a floor, wall or ceiling.

If your house is old, likely it is not insulated enough and you’re energy bills are likely to be high. If so, begin in the attic. That’s where you are likely to be emptying your wallet. If you don’t use your attic for storage, things get easier. The best is to lay fiberglass on the attic floor with the vapor barrier (which is on one side of the fiberglass sheet) toward the living area. A thickness of about twelve inches should probably be used. This gives you double duty because not only does the fiberglass insulate but you also get an air area which is effectively a second insulation. If you have to insulate the attic ceiling which is the roof, you need to install spacers to keep the fiberglass from contact with the roof.

The skill set required for fiberglass insulation is minimal . You have to be able to measure and cut. So you will need a tape measure and sharp blade . For safety reasond, in addition, you should have a mask to protect against inhaling fiberglass particles, safety glasses and gloves.

Insulating walls requires blowing in a foam which is another task entirely and needs different equipment. You can usually rent blowing equipment. Esssentially you have to drill a hole, usually in the outside siding big enough for the tube to fit. You also have to be aware that vertical beams separate sections of the wall so a hole has to be drilled for each section to blow in the insulation. After you finish, plug up the holes.

Insulating your basement has two results. First of all, it makes the basement livable for whatever use you want to put it to – storage, ping-pong, playroom etc. Secondly, an insulated basement helps keep the rest of the house warm. Before insulating the walls you should insulate the spaces between the joists in the ceiling with fiberglass. Insulating the walls requires installing a vapor barrier by taping it to the wall and then putting furring strips horizontally and vertically over the barrier to hold the insulation. The details on installing the basement wall insulation is for another time.

What You Can Do When Your Kitchen Sink is Clogged

A kitchen is an integral part of your home. This particular area of your house provides ample room for you to prepare your meals without the fear of disturbing anyone. That’s why maintaining your kitchen at its best condition is very crucial to the overall integrity of a house. Otherwise, you would have a hard time feeding your family if there is something wrong with your kitchen. One of the many problems you might encounter in your kitchen is a clogged sink. Rather than spend your precious time and money on hiring a plumber, it would do you well to know how to solve this predicament on your own. Don’t worry because this task is simple enough to accomplish.

Gather the Necessary Tools

First and foremost, you would need to the proper tools to remove anything that’s clogging your kitchen sink. You would need a plunger, clamp, wrench, a drain snake, and a pair of pliers to effectively remove any kind of clog in your kitchen sink. At the same time, don’t forget your protective gloves as well. Anything inside your kitchen’s drainage system is sure to be dirty and exposing your bare skin to them can be really harmful. Do yourselves a favor and don’t allow that to happen by getting a pair of gloves.

Get Rid of Any Clogging Materials Using a Plunger

After you have obtained the required tools, get the plunger first. Hold it with a firm grip and place the other end on your kitchen sink’s hole. Do remember to place the plunger using a 90-degree angle and push it down gently at first. Exert a little effort as you gradually push down on the aforementioned hole. The plunger will remove some of the food waste or trash that’s stuck in your kitchen’s sink and make this job a whole lot easier. Keep in mind to have a waste container nearby so you can place the waste inside it right away.

Eliminate All Traces of Dirt in the P-Trap

Even after using a plunger, there will still be a lot of waste left in your kitchen sink. To remedy that problem, you will need to disassemble the P-Trap under your sink. Basically, this pipe resembles the letter J and transmits all waste from your sink to your house’s drainage system. For starters, place a basic underneath this kitchen plumbing fixture to catch all waste when you disassemble it. Loosen the slip nut that’s holding the P-Trap in place with the help of a wrench. Once you have loosened the P-Trap, take it out and clean all the waste you see with soap and water. You might need a powerful detergent because there will be grease in it.

Clear the Remaining Clogging Materials in the Kitchen Drain Pipes

Along with your sink and P-Trap, your kitchen’s drain pipes can also contain waste in them. If you have done the previous steps, you might need to clean these drain pipes as well. Better get the drain snake and insert it into your drain pipes. Continue inserting this plumbing tool until it hits an obstruction. Once it does, crank the drain snake until its tip digs into the clog. You will be able to pull the material that’s clogging your pipes and clear your drainage once again.

Remember, if the job looks a little bit daunting, don’t be shy about hire a professional plumber.



Getting Started

Hanging wallpaper yourself is a project but with the right attitude it can be fun, but you have to be careful. The first thing to do is pick out the paper. There are sample books in the stores that won’t quit. Sometimes I think picking out the paper is the hardest part of the job. Get yourself a kit of tools if you want to do the job without pain. Most stores will have such a kit and some tools to supplement the kit. Let the store personnel advise you. If you don’t have the tools you need, the job will be more difficult.

Removing the Old

If there is already paper on the wall, you should remove it. Sometimes you can paper over it if it’s in great condition but I’ve found those situations rare. And why would you want to take the chance? There are several ways to do it. Use a spray bottle of vinegar and water or commercially available removers. But before spraying, it’s a good idea to remove the outlet and switch covers and turn off the circuit breaker. Then use a puncture tool which will make holes in the paper without damaging the wall behind it. Spray the old paper well and the old paste gets very wet. Wait fifteen or twenty minutes and use a scraper to get the paper off. This is the worst part about papering, – removal. Re-spray if you have to. After removing the paper, wash the wall down thoroughly. Plaster any bumpy spots and make the wall as smooth as possible.

Paint the Ceiling First

Take this tip. If you plan to paint the ceiling, do it before papering. You don’t want paint dripping onto freshly hung paper.

How Much Do You Need

The next step, although you probably would have done this first is to measure and estimate how much paper you need. You don’t want to add paper later. It may not come from the same printing batch and be just different enough to drive you crazy. The best thing to do is measure your walls and take the measurements to the place you’re buying the paper. They’ll be able to give you a proper estimate of how many rolls you need. Get a sample to put on your wall to see how it looks. Also, depending on the pattern, you need a sample to plan how the edges should match up.

Enjoy it

Finally, take your time and enjoy it. It can be a fun project for a family. And if you have any questions, the store personnel will be happy to advise you. They love do-it-yourselfers. If they can make it easy for you, they’ve got you as a customer.